How To Change Engine Oil For Mazda Cars

Maintaining the engine oil in your Mazda car is essential for optimal engine performance and longevity. Regular oil changes help lubricate engine components, reduce friction, and prevent premature wear and tear. By learning how to change the engine oil yourself, you can save time and money while ensuring your Mazda runs smoothly for miles to come.

Gathering the Necessary Tools and Materials

Before you begin the oil change process, gather all the necessary tools and materials. You'll need a wrench or socket set, an oil filter wrench, a drain pan, a funnel, a new oil filter, and the appropriate type and quantity of engine oil for your Mazda model. Refer to your owner's manual or consult with a Mazda dealership to determine the correct oil specifications for your vehicle.

Preparing the Vehicle

Start by parking your Mazda on a level surface and allowing the engine to cool down slightly. Engage the parking brake and place wheel chocks behind the rear tires to prevent the vehicle from rolling. Then, open the hood and locate the engine oil filler cap.

Draining the Old Oil

Position the drain pan underneath the engine oil drain plug, which is typically located on the bottom of the engine oil pan. Use a wrench or socket set to loosen the drain plug and carefully remove it, allowing the old oil to drain completely into the pan. Be cautious as the oil may be hot.

Replacing the Oil Filter

While the old oil is draining, locate the oil filter, which is typically mounted on the engine block. Use an oil filter wrench to loosen and remove the old oil filter, taking care not to spill oil onto the engine or surrounding components. Once the old filter is removed, use a clean rag to wipe away any residue from the filter mounting surface.

Adding New Oil

After allowing the old oil to drain completely, reinstall the drain plug and tighten it securely with a wrench or socket set. Then, install the new oil filter by applying a small amount of clean oil to the rubber gasket and threading it onto the filter housing by hand. Use the oil filter wrench to tighten the filter snugly, being careful not to over-tighten.

Refilling the Engine with Oil

Using a funnel, carefully pour the appropriate quantity of fresh engine oil into the engine oil filler opening. Refer to your owner's manual for the correct oil capacity for your Mazda model. Once the oil is added, replace the engine oil filler cap and ensure it is tightened securely.

For genuine Mazda replacement parts and accessories, visit Empire Mazda of Green Brook online.

Checking the Oil Level

After completing the oil change, start the engine and allow it to run for a few minutes to circulate the new oil. Then, turn off the engine and wait a few moments for the oil to settle. Use the dipstick to check the oil level and add more oil if necessary to reach the appropriate level.

By following these step-by-step instructions, you can confidently change the engine oil in your Mazda car and maintain optimal performance and reliability.